- The UPGRADED DTF LED Kit for PS4 controller is finally here!
- Home button and shoulder buttons are added in this newest DTFS LED Kit.
- Easier installation, 10 colors selection, 7 individual LED areas, it will make your PS4 controller stand out from the crowd!
- Fully designed for PS4 controller, only works on PS4 controller (CUH ZCT2*, JDM-040/050/055).
- 7 different colors, red, yellow, green, cyan, blue, pink, purple. And with gradient, fast blink and colorless, there are 10 different selection.
- You can mix and match your own favorite color in 7 individual buttons areas, or you can turn off the color of any buttons area at any time.
- With a memory function, it will record the color of the last setting, no need to set it again after restarting the controller.
- Easy for installation, open up your controller, stick and plug, no soldering required.
- Button control, easy to operate.
- D-pad, home button, R1, L1, R2, L2, 2 thumbsticks, and face buttons have classical carving symbols on them.
- Also comes with full tools for disassembling the controller.
- PS4 controller NOT included.
- Basic hand on skills required.
- The DTFS Kit only supports eXtremeRate's touchpad module bracket and flexible cable.
- This product doesn't contain any batteries.
- It is powered by PS4 controller.
- Video installation guide please search "ExtremeRate DTFS LED Kit" on Youtube.
- Share and Options buttons will not be lit after installation.
- The PS4 controller（JDM-050/055) share & options buttons need to be combined with the black button pad to install, please refer to the installation instructions picture.
- ExtremeRate PS4 controller DTFS LED kit x1
- ExtremeRate Touch-pad module bracket x1
- D-pad x1
- Home button x1
- Share button x1
- Options button x1
- Black buttons pads x2
- L1R1 L2R2 trigger buttons x1
- Thumbsticks x2
- Face buttons x4
- Trigger springs x2
- PH00 screw driver x1
- Screws x8
- Prying tool x1
- Tweezers x1
1. The controller and other parts are not included!
2. You will void your controller warranty when installing this product.
3. This is a DIY project, so it's your own risk of any damage to your controller. However we will always be there to assist you for the installation.
