Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joycon. Actually, they are housings with full set buttons for NS Switch Joycon & OLED Joycon without any electronic parts. The console, Joycon and other parts are not included. The console housing shell is not included.
2. Requires customers to take apart the Joycon to replace the Joycon shells and buttons. Requires customer with custom electronic installation experience.
3. Get an installation video guide on YouTube by searching "o8QPB2uTbHk".
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch a YouTube video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joycon you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joycon outer screws make sure you are using a Tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all time to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joycon are spring loaded so be careful when opening.
Product Features:
1. Totally upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
Package Includes:
1x Left Joycon housing with middle tray
1x Right Joycon hosing with middle tray
1x L button
1x R button
1x A/B/X/Y buttons
1x Direction buttons
2x SL buttons
2x SR buttons
1x ZL button
1x ZR button
Screwdriver Set
1x Cross screwdriver
1x Tri-wing screwdriver
40x Screws
8x Springs
Note:
1. The Joycon controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch Joycon. Actually, they are housings with full set buttons for NS Switch Joycon & OLED Joycon without any electronic parts. The console, Joycon and other parts are not included. The console housing shell is not included.
2. Requires customers to take apart the Joycon to replace the Joycon shells and buttons. Requires customer with custom electronic installation experience.
3. Get an installation video guide on YouTube by searching "o8QPB2uTbHk".
Installation Tips:
1. Installation difficulty: High
2. Time spent: 3 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch a YouTube video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joycon you must be conscious of how tight you are tightening the screws as that will affect how your buttons press.
7. When removing the Joycon outer screws make sure you are using a Tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over tighten any screws.
8. There are multiple very delicate ribbon cables that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all time to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joycon are spring loaded so be careful when opening.
Product Features:
1. Totally upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
Package Includes:
1x Left Joycon housing with middle tray
1x Right Joycon hosing with middle tray
1x L button
1x R button
1x A/B/X/Y buttons
1x Direction buttons
2x SL buttons
2x SR buttons
1x ZL button
1x ZR button
Screwdriver Set
1x Cross screwdriver
1x Tri-wing screwdriver
40x Screws
8x Springs
Note:
1. The Joycon controller and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
