Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch console and Joycons. Actually, they are full housing shells with full set buttons for Nintendo Switch without any electronic parts. The console, Joycon and other parts are not included.
2. Requires customers to take apart the Joycon to replace the Joycon shells and buttons. Requires customers with high electronic installation experience. Get the installation video guide on You Tube by searching "cTajxu8ZpzI" and "o8QPB2uTbHk".
Installation Tips:
1. Installation difficulty: High
2. Time spent: 4 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch a YouTube video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joycons you must be conscious of how tight you are tightening the screws as that will affect how your buttons to press.
7. When removing the Joycon outer screws make sure you are using a Tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables in the Joycon that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joycons are spring-loaded so be careful when opening.
11. Installing the console back-plate is easy. Simply disassemble your original back housing and kickstand from the Switch, then replace it with eXtremeRate backplate and kickstand.
Product Feature:
1. Totally upgrade your Switch to the exclusive and stylish level.
2. Ergonomic dpad button can greatly improve your left Joy con function, perfect for dpad intensive games.
3. A variety of styles and designs are available.
Package Includes:
1x Back plate for Nintendo Switch console with kickstand
1x Left housing with middle tray for Joycon
1x Right housing with middle tray for Joycon
1x A/B/X/Y buttons
1x Dpad
1x L button
1x R button
1x ZL button
1x ZR button
2x SL buttons
2x SR buttons
1x Screwdriver handle
1x PH00 screwdriver bit
1x Y00 screwdriver bit
64x Screws
8x Springs
1x Adhesive sponge pad
2x Speaker dustproof net
Note:
1. The console, Joycon and other parts are not included.
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don't wrongly think they are Switch console and Joycons. Actually, they are full housing shells with full set buttons for Nintendo Switch without any electronic parts. The console, Joycon and other parts are not included.
2. Requires customers to take apart the Joycon to replace the Joycon shells and buttons. Requires customers with high electronic installation experience. Get the installation video guide on You Tube by searching "cTajxu8ZpzI" and "o8QPB2uTbHk".
Installation Tips:
1. Installation difficulty: High
2. Time spent: 4 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch a YouTube video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joycons you must be conscious of how tight you are tightening the screws as that will affect how your buttons to press.
7. When removing the Joycon outer screws make sure you are using a Tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables in the Joycon that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joycons are spring-loaded so be careful when opening.
11. Installing the console back-plate is easy. Simply disassemble your original back housing and kickstand from the Switch, then replace it with eXtremeRate backplate and kickstand.
Product Feature:
1. Totally upgrade your Switch to the exclusive and stylish level.
2. Ergonomic dpad button can greatly improve your left Joy con function, perfect for dpad intensive games.
3. A variety of styles and designs are available.
Package Includes:
1x Back plate for Nintendo Switch console with kickstand
1x Left housing with middle tray for Joycon
1x Right housing with middle tray for Joycon
1x A/B/X/Y buttons
1x Dpad
1x L button
1x R button
1x ZL button
1x ZR button
2x SL buttons
2x SR buttons
1x Screwdriver handle
1x PH00 screwdriver bit
1x Y00 screwdriver bit
64x Screws
8x Springs
1x Adhesive sponge pad
2x Speaker dustproof net
Note:
1. The console, Joycon and other parts are not included.
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
