Tired of your boring old gray standard color?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don' wrongly think they are Switch console and Joycon. Actually, they are full housing shells with full set buttons for NS Switch without any electronic parts. The console, Joycon and other parts are not included.
2. Requires customers to take apart the Joycon to replace the previous Joycon shells and buttons. Requires customer with electronic custom experience. Get the installation video guide on YouTube by searching "eXtremeRate New Horizon Style Switch Joycon" or "o8QPB2uTbHk".
Installation Tips:
1. Installation difficulty: High
2. Time spent: 4 hours or more
3. Patience needed: High
4. Go slow. Check every connection. Keep your screws organized.
5. Watch a Youtube video on how to do it though, pausing and replaying often.
6. When you are reassembling the Joycon you must be conscious of how tight you are tightening the screws as that will affect how your buttons pressing.
7. When removing the Joycon outer screws make sure you are using a Tri-wing screwdriver. Be careful not to strip the 4 outer triangle screws or over-tighten any screws.
8. There are multiple very delicate ribbon cables in the Joycon that need to be removed and reattached.
9. Use tweezers instead of bulky fingers at all times to help with the little pieces that you'll take to move to the new case.
10. Note that the ZR and ZL on the Joycon are spring-loaded so be careful when opening.
11. Installing the console back-plate is easy. Simply disassemble your previous back housing and kickstand from the Switch, then replace it with eXtremeRate backplate and kickstand.
Product Feature:
1. Totally upgrade your Switch to the exclusive and stylish level.
2. Made of durable non-toxic ABS plastic.
3. A variety colors are available.
4. The shells are clear but not 100% transparent.
Package Includes:
1x Backplate for NS Switch console with Kickstand
1x Left housing with middle tray for Joycon
1x Right housing with middle tray for Joycon
2x A/B/X/Y buttons
2x Direction buttons
1x L button
1x R button
1x +/-/home/shoot buttons
2x SL buttons
2x SR button
1x ZL button
1x ZR button
1x Screwdriver handle
1x Cross screwdriver bit
1x Tri-wing screwdriver bit
64x Screws
8x Springs
1x Adhesive sponge pad
2x Speaker dustproof net
Note:
1. The Joycon, console and other parts are not included!
2. It is recommended to clean with a wipe with water. If alcohol is used, clean it with a wipe dampened with less than 70% alcohol and place it in a ventilated place to dry in time. Do not spray water or alcohol directly on the product surface. Do not use any other organic solvents for cleaning.
