Tired of your boring old gray standard colour?
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don’t wrongly think this is a Switch console. This is a front shell for NS Switch console without any electronic parts. The console, joycon, buttons and other parts are not included. Console front frame only, the joycon housings are not included!
2. Requires customers to take apart the console to replace the original front shell. Requires customers with high electronic installation experience. Get the installation video guide on YouTube by searching "eXtremeRate front shell for NS Switch Console".
3.You will void your console warranty when installing this product. This is a DIY project, so it's your own risk of any damage to your controller. However, we will always be there to assist you with the installation.
Product Feature:
Totally upgrade your Switch to the exclusive and stylish level.
Made of durable non-toxic ABS plastic.
Various colours to match your custom Switch console backplate from eXtremeRate.
The texture is not a rubberized finish. Instead, it is semi-slick, matte soft plastic.
More comfortable and feels better in hands than the stock front shell.
The wood grain patterned design looks great; Great smooth grip, soft in hand and feels silky; Anti-slip, sweat-free for a long period of game playing.
Installation Tips:
Installation difficulty: High
Time spent: 1 hour or more
Patience needed: High
Go slow. Check every connection. Keep your screws organized.
Watch a Youtube video on how to do it though, pausing and replaying often.
When removing the Switch outer screws make sure you are using the correct screwdriver.
Be careful not to strip the triangle screws or over-tighten any screws.
Use tweezers instead of bulky fingers at all time to help with the little pieces that you'll take to move to the new case.
Please confirm all the needed screws are removed and the circuit is cut off, then pick up the PCB board.
Be careful to use a heat gun or hair dryer to help you get the touchscreen off the old shell.
Note that the temperature of the heat gun should not be much high. Use the light hot wind to evenly heat the edges of the screen.
Please remember not to forcibly lift the screen to avoid damaging the touchscreen.
Package Includes:
1x Face plate for NS Switch console
1x Volume up/down buttons
1x Power button
1x Game card tray
1x Prying tool
1x Tri-wing screwdriver
1x Cross screwdriver
37x Screws
Note: The console and other parts are not included!
This is the way to go!
Great customization option for DIY enthusiasts with a Switch.
Read Before Purchase:
1. Please don’t wrongly think this is a Switch console. This is a front shell for NS Switch console without any electronic parts. The console, joycon, buttons and other parts are not included. Console front frame only, the joycon housings are not included!
2. Requires customers to take apart the console to replace the original front shell. Requires customers with high electronic installation experience. Get the installation video guide on YouTube by searching "eXtremeRate front shell for NS Switch Console".
3.You will void your console warranty when installing this product. This is a DIY project, so it's your own risk of any damage to your controller. However, we will always be there to assist you with the installation.
Product Feature:
Totally upgrade your Switch to the exclusive and stylish level.
Made of durable non-toxic ABS plastic.
Various colours to match your custom Switch console backplate from eXtremeRate.
The texture is not a rubberized finish. Instead, it is semi-slick, matte soft plastic.
More comfortable and feels better in hands than the stock front shell.
The wood grain patterned design looks great; Great smooth grip, soft in hand and feels silky; Anti-slip, sweat-free for a long period of game playing.
Installation Tips:
Installation difficulty: High
Time spent: 1 hour or more
Patience needed: High
Go slow. Check every connection. Keep your screws organized.
Watch a Youtube video on how to do it though, pausing and replaying often.
When removing the Switch outer screws make sure you are using the correct screwdriver.
Be careful not to strip the triangle screws or over-tighten any screws.
Use tweezers instead of bulky fingers at all time to help with the little pieces that you'll take to move to the new case.
Please confirm all the needed screws are removed and the circuit is cut off, then pick up the PCB board.
Be careful to use a heat gun or hair dryer to help you get the touchscreen off the old shell.
Note that the temperature of the heat gun should not be much high. Use the light hot wind to evenly heat the edges of the screen.
Please remember not to forcibly lift the screen to avoid damaging the touchscreen.
Package Includes:
1x Face plate for NS Switch console
1x Volume up/down buttons
1x Power button
1x Game card tray
1x Prying tool
1x Tri-wing screwdriver
1x Cross screwdriver
37x Screws
Note: The console and other parts are not included!
